E-TON Beamer Service Manual download pdf (Page 19)

Beamer Rev-2.0.2 Page 19 of 55 11/21/2005

DISASSEMBLY

Unscrew the float chamber screws and remove the

float chamber.

Disassemble the float arm pin, float and float needle

valve.

Inspect the seat of the float needle valve for wear or

damage.

Disassemble the idle jet, main jet, idle speed

adjustment screw, and idle mixture adjustment screw.

Inspect all jets and screws for wear or damage.

Clean the passages and jets with compressed air.

ASSEMBLY

Clean all parts in solvent and blow it dry with

compressed air. Assembly is the reverse order of

disassembly.

Main Je

Pilot Je

www.Get2itParts.com

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 64 65

No comments

E-TON Beamer Service Manual Page 19