E-TON EV3 E-MO Service Manual download pdf (Page 91)

ϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰ

7-19

LOWER BRACKET

CHAS

1. Install

INSTALLING THE LOWER BRACKET

• Bearing ball

• Outer bearing race

• Make sure the bearing ball size is correct.

• Make sure the site of up and down while installing

outer bearing race and upper bearing race.

2. Lubricate

• Bearing ball

Lithium-soap-based grease

Please use lithium-soap-based grease to smear.

3. Install

• Front fender assembly

• Ball race outer

• Bearing ball

• Ball race upper

• Ball race cover

• Ring nut

Holding the front fender assembly until tighten.

4. Tighten

• Ring nut

Tighten steps :

Install a ring nut wrench on the steering nut wrench

and tighten by verticality and get the tightening

torque.

Lower ring nut (final tightening torque)

Upper ring nut

12Nm (1.2m • kg, 8.7ft • lb)

Lower ring nut (initial tightening torque)

35Nm (3.5m • kg, 25.3ft • lb)

50 Nm (5.0 m • kg, 36.2 ft • lb)

• Tighten the ring nut with the ring nut wrench

TIP

NOTICE

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 100 101

No comments

E-TON EV3 E-MO Service Manual Page 91